PSN-L Email List Message

Subject: RE: good leveling screw source
From: "Larry P Thomas" lpthomas@.........
Date: Tue, 18 Oct 2005 07:24:08 -0500

How about adapting (modifying) a cheap micrometer as an adjustment =
Should 100 tpi and would have a nice knurled handle to turn.  Just an =
It may not end up any cheaper.

Larry P. Thomas, wa0gwa

Imagine it/Achieve it --- Dream it/Become it
Larry P. Thomas,    wa0gwa    1 913 244-8761
Krell Technologies    (
PO BOX  3565,  OLATHE,  KS  66063-3565   USA=20


-----Original Message-----
From: psn-l-request@.............. [mailto:psn-l-request@............... =
Behalf Of Mark Robinson
Sent: Tuesday, October 18, 2005 5:54 AM
To: psn-l@..............
Subject: Re: good leveling screw source

Angel wrote:
> Hello,
> I have spent a good hour looking on the web for some nice leveling
> screws with no luck.  Does anyone on the list have a source.
> Something with a high thread count and a point so the thing does not
> walk when you turn it.

Roger's post got my head working.

Have a look at some old carburettors at a car wreckers.

I was always impressed by the flame adjustment screws in old Bic Flic
lighters, but they seem to be unobtanium in NZ these days.



Public Seismic Network Mailing List (PSN-L)


Public Seismic Network Mailing List (PSN-L)

[ Top ] [ Back ] [ Home Page ]